Thanks for that info, it is one of the one's I have on order, it is a diff "brand" but the same unit - physically and specs.

Which one are you using, I'm in the middle of choosing one so would like you consider it as an option.

16 Oz of R134a by weight is 12.09 fluid Oz Thanks helpful! The terminology fl of vs weight oz doesn't seem to me consistent. Like the MACS article uses fl oz of oil and ratios it to weight of refrigerant. The Sanden ORC calculation uses only weight. Since in oil 1 fl oz weighs about .94 oz maybe it...

With all the talk in other thread about micron values, I'll be trying out a few Micron gauges to select one. Interesting behavior with the two gauges I received so far. When Gauge A is connected to vacuum pump and Gauge B by a tee , Gauge A reads much lower. VP Vacuum Pump T tee M microns Gauge A - ...

Thanks for the pics. Out of my expertise as the schematic and images you provided are not what I would expect. Hopefully one of the more experienced folks will come along and share their wisdom. Since yours is a different situation that the original post, the moderators may suggest a separate topic ...

....condenser has the discharge line from the compressor connected to the bottom of the condenser and the Liquid line connected from the expansion valve to the top of the condenser ..... * Discharge line from the Compressor to the large port (Bottom) of the condenser.... * Liquid line from the expa...

re: Tim relay comment, yes will run through relay and will use a smaller fuse Tested the clutch with +12V to pink (closest to locking tab) because it is color-closer to red than the other wire which is gray, which is color-closer to black, which got the -V (gnd) Draw was 4.5A Over 5ft one-way length...

Sanden Info is based on oil circulation ratio OCR with 1 to 3 ounces remaining in the swashplate compressor crankcase and cling oil remains in AC components. OCR = weight of oil in circulation at any moment divided by weight of both oil and refrigerant in circulation and varies with operating condi...

Want to make sure I wire enough capacity for the clutch. Just got the pigtail for the FS10 compressor. The wire is 2.08mm which is 14AWG, that's like 12-14A. The last compressor used a really thin clutch activation wire like a 20?AWG Also, research indicates the 2 wires one is + and one - (ground). ...

. I have replaced all the components in the AC system with stock components (Condenser, Evaporator, VIR, hoses and compressor ). The compressor is a Pro6ten compressor with the superheat feature like the original and is the only nonstock item in the system . Is the compressor stock or not stock? Al...