Page 1 of 1

AC machine vacuum hose identification

Posted: Fri Dec 11, 2020 2:17 pm
by conley
Can anyone tell me what packing is used for this vacuum hose? It goes from the vacuum pump to solenoid on a Kent Moore/GM AC4 RRR machine. I've had no luck with any assortment of o rings/packings I have tried, robinair can't look it up, I'm sure it's something really common and simple but I don't know what to look up to find it. Replacement hose has been backordered for months

My jpeg files are only 2MB but it says it's too big, I'm guessing website links are frowned upon though

Re: AC machine vacuum hose identification

Posted: Fri Dec 11, 2020 2:19 pm
by conley
https://talk.newagtalk.com/forums/threa ... 4#M8662024

Here is a cross post on another forum with pictures, sorry if links aren't allowed

Re: AC machine vacuum hose identification

Posted: Sat Dec 12, 2020 10:43 am
by Dougflas
I have no idea but did you try McMaster Carr?

Re: AC machine vacuum hose identification

Posted: Sat Dec 12, 2020 11:26 am
by GM Tech
I've made my own before- just get rubber hose at auto parts store- right O.D. and slice off pieces- pretty easy and you'll have plenty of spares. They are called rubber seals or inserts.