Dodge A/C Help

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
a1parrothead
Posts: 4
Read the full article
Joined: Wed Aug 12, 2020 10:53 pm

Dodge A/C Help

Post by a1parrothead »

Hello all,
I am working on a 96 Dodge Ram van 3500 with a 318. It sounds like the compressor is clicking on and off all the time.
I had the R134 checked twice and it is full and pressures are fine.
I replaced the high and low pressure switches in the lines.
It still is clicking. It blows nice cold air, but cycles a lot.
My local shop has tapped out!
Any ideas? Maybe another pressure switch somewhere? Bad compressor?
Jeff
User avatar
Cusser
Preferred Member
Posts: 846
Joined: Sun Apr 24, 2016 6:29 am

Re: Dodge A/C Help

Post by Cusser »

Would not hurt to check the AC clutch gap.

Had the gap issue on my '98 Frontier last summer, removed one shim to fix.
a1parrothead
Posts: 4
Joined: Wed Aug 12, 2020 10:53 pm

Re: Dodge A/C Help

Post by a1parrothead »

It has only been checked by gauges. How do the check refrigerant weight? Would they evacuate the system then put in specified weight?

I will research the the gap. I do not know anything about it.

Thanks for the replies,
Jeff
User avatar
Tim
Site Admin
Posts: 1104
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:

Re: Dodge A/C Help

Post by Tim »

Cusser is on track with suggesting the clutch gap might be too wide. If the proper charge level is confirmed. This would be my first area of concern.

You also need to have someone reclaim the refrigerant, evacuate the system, and recharge by weight. Then see what the readings are.
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
a1parrothead
Posts: 4
Joined: Wed Aug 12, 2020 10:53 pm

Re: Dodge A/C Help

Post by a1parrothead »

OK. I will look at all of that.

Also thinking maybe failing expansion valve?

Also read about a clogged screen somewhere in the system? But cannot find it on the internet again.
User avatar
JohnHere
Preferred Member
Posts: 1196
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: Dodge A/C Help

Post by JohnHere »

Pressure readings surely will help us with a diagnosis. Do you have a manifold gauge set that you can hook up?
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to this Forum.
a1parrothead
Posts: 4
Joined: Wed Aug 12, 2020 10:53 pm

Re: Dodge A/C Help

Post by a1parrothead »

My neighbor has one. I will borrow it in the next day or so.
User avatar
JohnHere
Preferred Member
Posts: 1196
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: Dodge A/C Help

Post by JohnHere »

When you're testing the pressures, have the engine at about 1,800 RPM, windows and doors open, blower on medium speed, and A/C on normal. This is to get the compressor pumping sufficiently and to maximize the heat load on the system. Be sure to record the pressures while the compressor is running and not after it clicks off. Also record the ambient temperature just in front of the grille, not what the weather report says.
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to this Forum.
Post Reply